close
Choose Your Site
Global
GH-32500HL
Jointech
8205700000
Weight: 4150g
Holding Capacity: 2500kg
Plunger Stroke: 75mm
Handle Opens: 185°
Spindle Supplied: GH-SA-127517
An essential woodworking hand tool addition to your jig assembly, delivering dependable and secure straight line hold down clamp action for your work pieces, jigs and fixtures.
Before you can use the Push pull toggle clamp, you need to attach it to your workbench. The materials required are a pencil, four nuts, bolts, and a drill bit.
Mark each hole
Use a pencil to mark on the surface where you want to attach the push pull toggle clamps. Using the bolt holes as a practical guide, make sure you mark the four pilot holes, two for the side of the toggle.
Weight: 4150g
Holding Capacity: 2500kg
Plunger Stroke: 75mm
Handle Opens: 185°
Spindle Supplied: GH-SA-127517
An essential woodworking hand tool addition to your jig assembly, delivering dependable and secure straight line hold down clamp action for your work pieces, jigs and fixtures.
Before you can use the Push pull toggle clamp, you need to attach it to your workbench. The materials required are a pencil, four nuts, bolts, and a drill bit.
Mark each hole
Use a pencil to mark on the surface where you want to attach the push pull toggle clamps. Using the bolt holes as a practical guide, make sure you mark the four pilot holes, two for the side of the toggle.
