What are the markets for push pull toggle clamps?

Push pull toggle clamps meet the needs of a wide range of positioning clamping forms, with advantages in lateral positioning clamping, hole positioning clamping, vertical positioning clamping, etc. So, what are the markets for push pull toggle clamps? Here are some of them.

Here is the content list:

Coping with narrow rails

Cutting the tenon with the table saw

Locking the miter joint

Tension-free taper

Templates for routing narrow workpieces

Coping with narrow rails

The door rails in the furniture can easily pass through the top cover. Without adequate support, door rails can turn into a disaster. Not only will the cut be damaged, but your fingers will also be at risk. But all these safety issues can be avoided by using push-pull toggle clips. By integrating the switch into your daily routine, your workplace becomes a damage-free environment. You can use a push pull toggle clamp to complete the adequate support, all that is required is a thick base plate and spacer, which also needs to be topped with a plate.

Cutting the tenon with the table saw

It is not safe to hold the piece upright and feed it in with the blade with your bare hands. It is best to create a tenon jig using two push pull toggle clamps so that you can easily build a fence to hold the workpiece. Also, don't forget to attach the push pull toggle clamps to the spacers so that you can feed a piece of wood perfectly through the saw and you can also adjust the rip fence for cheek cuts.

Locking the miter joint

Closing miter joints with rod clamps are not as secure as you might think. Choosing a push pull toggle clamp is a good option. Thanks to the careful design and excellent functionality of the push pull toggle clamp, you can use it with square support blocks and basic forms. Remember to use painter's tape to prevent the glue from sticking to the support block and the base.

Tension-free taper

As a rule, two-legged mortise and tenon jigs have obvious defects. There is no comfortable and effective way to secure the workpiece to the tapered legs of the fixture. Whether you use a push bar or hold it by hand, is both awkward and risky. But with push pull toggle clamps, you can experience convenience throughout the process. What's even more special is that you can keep your fingers out of harm's way. And you can make a tapered clamp from a scrap piece.

Templates for routing narrow workpieces

Both pilot drills and templates help you to make arched door rails and other shaped parts. However, milling curved and narrow workpieces can put your fingers close to the bit. How can I avoid taking risks? There is a good way to ensure your safety. Make your template wider than normal and add a spacer block to your switch, and that is by using a push pull toggle clamp. The next thing you need to do is to place spacers to extend the piece for proper trimming. Fix the elbow joint to the spacer and easily press the workpiece onto the template. With the push pull toggle clamp, you can say goodbye to double-sided tape, push pads or messy hot-melt adhesives. You can still keep parts aligned by locking the clamps. You can use the push pull toggle clamps as handles when working at home or in the office.

Jointech Industrial Co., Ltd has a huge market for our push-pull toggle clips and our products are of excellent quality.