Views: 0 Author: Site Editor Publish Time: 2022-03-31 Origin: Site
The push pull toggle clamp is a type of quick clamp. However, you may not know much about it, so you must have a lot of questions about this product.
Here is the content list:
What does clamp pressure mean?
How do I measure the pressure?
What is the difference between force and pressure?
How much pressure can the push pull toggle clamps withstand?
The clamping force of a push pull toggle clamp is a key factor to consider before you start applying it. When clamping, you must apply the right amount of pressure to a piece of wood. But never exceed the recommended pressure as it can seriously damage your workpiece. Also, applying too little pressure is not ideal.
The jaws of the push pull toggle clamps are the clamping jaws that apply pressure. Adequate clamping pressure plays an important role for different applications (e.g. gluing). Using the push pull toggle clamps to hold two objects while the solution sets ensure a gentle but firm grip on the part. But push pull toggle clamps do not need to be used with excessive force; too much pressure can lead to uneven glue lines. This means that the glue may run out or it may not be possible to glue each part together for a long period. The general guideline for the amount of pressure required during clamping when gluing is expressed in pounds per square inch. For hardwoods, it is between 175 and 250 PSI. For softwoods, it is between 100 and 150 PSI. The amount of pressure required depends on the shape of the blocks. When they are mounted parallel together, you need to apply less pressure. When the two sections are disconnected, you should apply more pressure.
Force and pressure are not the same things. Pressure is the force exerted by one object on the surface of another object. In short, if a push pull toggle clamp has a small jaw, it can automatically exert more force when it is closed. This will result in a large amount of pressure acting on the surface area of a piece of wood. This can, however, cause potential damage. The advantage is that you can avoid damaging the surface of the furniture. You can use a jaw pad with a large surface area to spread enough force over a large area. It also reduces the pressure on each workpiece.
As a rule, woodworking equipment has excellent clamping forces due to the screw mechanism. Most clamps have a maximum clamping force. You can see it on the package itself, which is specifically measured in Newtons. The information on the size of the push pull toggle clamps will help you to calculate the degree of pressure the tool will exert on a piece of wood. There are no general and specific rules for the pressure applied to different pieces of wood. However, experts recommend that the larger the wood, the greater the pressure required.
After reading the above questions and answers, I am sure you have a good understanding of push pull toggle clamps. Jointech Industrial Co., Ltd has excellent quality push pull toggle clamps and if you are interested, you can contact us.
Subsribe Now | Get Daily Update Into Your Mail For join Now