Inspection and maintenance of Pneumatic Toggle Clamp
Home » News » News » Inspection and maintenance of Pneumatic Toggle Clamp

Inspection and maintenance of Pneumatic Toggle Clamp

Views: 0     Author: Site Editor     Publish Time: 2022-07-28      Origin: Site

Inspection and maintenance of Pneumatic Toggle Clamp

Daily inspection of Pneumatic Toggle Clamps and maintaining a good clamp status are the prerequisites for product quality to maintain a relatively stable batch. Regular cleaning of the Pneumatic Toggle Clamp can prolong the service life. Next, let us understand the inspection and maintenance of Pneumatic Toggle Clamps. Here are some answers.


Here is the content list:

  • Check the status of the product.

  • Maintenance and cleaning methods.


Check the status of the product.

First, in the clamping state, check whether the parts of the Pneumatic Toggle Clamp are well matched and whether the chuck is loose. In the clamped state, if there is no obvious gap between the parts of the Pneumatic Toggle Clamp, and the parts are not offset by an external force, it is in good condition. The matching state of the parts meets the requirements of the welding process, which can ensure the stability of the product quality.

Second, check whether the positioning pins and bolts of the Pneumatic Toggle Clamp are worn or loose. Make sure that the number of positioning pins is correct, that there are no obvious signs of wear on the contact surface of the part punching hole, and that the nuts and washers are in good condition and the positioning pins are not loose. Both of these are in good condition, which can ensure stability in the clamped state.

Third, check the chuck profile and nylon block profile of the Pneumatic Toggle Clamp for wear and surface debris. It is necessary to control the position of the solder joints to ensure that the position of the solder joints is within the required range.

Fourth, check whether the gasket fixing nut of the Pneumatic Toggle Clamp is loose and whether the gasket is intact. No looseness of hexagon socket screws and no gaps and no missing between gaskets are the means of quality optimization and control in the production process of products.

Fifth, check whether the Pneumatic Toggle Clamp is clean and whether welding slag and splash are removed. It can ensure that the surface of the fixture is clean and the surface quality of the parts.

Maintenance and cleaning methods.

First, put water in the container in advance, and then put the alkali. Second, soak in the molten alkali first, and wait until the alkali and water are all fused. Third, put the Pneumatic Toggle Clamp into the lye. Finally, heat up. Use lye with a concentration of 30%-50%, heat it to about 60-80 degrees, and soak for 3-5 hours. The soaking time depends on how much electrophoretic paint is deposited. Then clean it with a high-pressure water gun or clean water. This can eliminate the acid and alkali deposits accumulated in the fixture, thereby increasing the service life of the fixture.

Our official website is https://www.toggle-clamps.com/. If you are interested in our Pneumatic Toggle Clamp products or have other needs, please contact us. With the help of precision CNC machine tools and skilled employees, our products have been sold to more than 40 different countries and have been well received by customers at home and abroad. We believe that our high-quality and cost-effective products will surely satisfy you and make you our repeat customers.


Subsribe Now     Get Daily Update Into Your Mail For join Now

QUICK LINK

PRODUCTS

CONTACT US

   Shimei Industrial Park, Wanjiang District, Dongguan City, Guangdong Province, China
   Skype: jimms19810411

    WhatsApp:0086-13713469601
   Email: jointechclamps@vip.163.com

                  sales@toggle-clamps.com

   Phone: 0086-0769-28680657

    Moblie: 0086-13713469601

Copyrights ©️ 2021 JOINTECH INDUSTRIAL CO.,LTD. All rights reserved.